Pricing & Job ConditionsThe prices shown are a guide only and apply to domestic, walk-in work. Every job is assessed individually, and final pricing may vary depending on part condition, preparation requirements, and coating specification.
Parts submitted for refurbishment must be as free as possible from oil, grease, and contaminants. Any bearings, rubber or plastic bushes, inserts, or fittings must be removed prior to coating.
OutgassingHeavily corroded parts — particularly cast metal, aluminium and magnesium — may be prone to outgassing when heated. This occurs when trapped gases, moisture, or contaminants within the metal are released when heated, which can result in surface bubbles or imperfections in the powder coat finish.
We take a number of steps to minimise this risk; however, it cannot be completely eliminated and may still occur.
Minimum ChargeA minimum charge of £60.00 per colour applies to all jobs
Industrial / Commercial
- Please contact is to discuss you specific requirements
Motorcycle Parts- Mid Sized Motorbike frame - £200
- Swing arm - £50
- Engine covers - £25
- Motorcycle Wheels - £150 pair
- Handlebars - £35
- Hubs - £20
- Yokes pair - £25
All Includes shotblasting and Epoxy Zinc Priming if required.
Car Parts- Steel Wheels - £60 per wheel
- Alloy Wheels - £80 per wheel
- Subframe - £180
- Anti Roll Bar - £60
- Rocker Cover - £60
All Includes stripping/shotblasting and Epoxy Zinc Priming.
Other- Push Bike Frame - £80
- Push Bike Forks - £20
Vapour BlastingCharged at £70 per hour, typical price guide:
- Motorcycle Single Cylinder - £60
- Motorcycle Engine Casing - £25
- Single Carburetor - £25
- Rocker Cover - £70
All prices are subject to VAT.
